Ford Fiesta 1.0 EcoBoost (2013-2015)
Engine code: M1JE
92 kW (125hp) 6000 rpm
R-Cat
| Component | Torque | Notes |
|---|---|---|
| Cylinder head | 10 Nm → 40 Nm → Slacken off 45° → 30 Nm → 90° → 90° | Renew bolts: Yes |
| Oil pump to cylinder block | 25 Nm | |
| Sump bolts | 10 Nm M10=48 Nm | |
| Sump drain bolt | 25 Nm | |
| Clutch pressure plate | 29 Nm | |
| Camshaft sprocket/gear | Finger tighten → 30 Nm → 50 Nm → 95 Nm → 45° | |
| Camshaft carrier/cap | 1)3 Nm 2)10 Nm | |
| Camshaft/rocker cover | 10 Nm | |
| Inlet manifold to cylinder head | 10 Nm | |
| Water pump | 1-5 = 10 Nm, 6-7 (use new bolts) = 15 Nm + 90° | |
| Spark plugs | 13 Nm | |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 10 Nm | |
| Camshaft position (CMP) sensor | 10 Nm | |
| Lambda sensor (Oxygen) | 48 Nm | |
| Knock sensor (KS) | 20 Nm | |
| Engine oil pressure switch | 20 Nm | |
| Oil filter | 15 Nm | |
| Front hub | 255 Nm | |
| Rear hub - wheel bearing housing bolts | Use new bolts. 65 Nm → Working diagonally, slacken each bolt 90° and immediately retighten to 65 Nm. | |
| Steering wheel | 48 Nm | |
| Steering rack/box mounting | 90 Nm | |
| Steering track rod end | 53 Nm | |
| Brake caliper to carrier | 26 Nm | Front |
| Brake caliper/carrier to hub | 70 Nm | Front |
| Brake caliper to carrier | 35 Nm | Rear |
| Brake caliper/carrier to hub | 70 Nm | Rear |
| ABS sensor | 9 Nm | Front |
| ABS sensor | 9 Nm | Rear |
| Road wheels | 135 Nm |