Ford Fiesta 1.2 (2008-2013)
Engine code: SNJB
60 kW (82hp) 5800 rpm
R-Cat
| Component | Torque | Notes |
|---|---|---|
| Cylinder head | 5 Nm → 15 Nm → 35 Nm → 75° | Renew bolts: Yes |
| Oil pump to cylinder block | 9 Nm | |
| Sump bolts | 1)10 Nm 2)20 Nm | |
| Sump drain bolt | 27 Nm | |
| Flywheel/driveplate | 30 Nm+80° | |
| Clutch pressure plate | 29 Nm | |
| Crankshaft pulley/damper centre bolt | Use new bolt. M12: Measure depth of threaded hole in crankshaft. Thread depth 42 mm: Use M12 x 29 mm. Thread depth 52 mm: Use M12 x 44,5 mm. Tighten to 40 Nm + 90°. M14: 100 Nm + 90°Wait 10 seconds15° | |
| Camshaft sprocket/gear | 60 Nm+45° | |
| Camshaft carrier/cap | 7 Nm+45° | |
| Camshaft/rocker cover | 9 Nm | |
| Inlet manifold to cylinder head | 18 Nm | |
| Exhaust manifold to cylinder head | 1)20 Nm 2)55 Nm | |
| Exhaust downpipe to manifold | 48 Nm | |
| Water pump | 10 Nm | |
| Spark plugs | 15 Nm | |
| Fuel rail | 8 Nm | |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 9 Nm | |
| Lambda sensor (Oxygen) | 47 Nm | |
| Front hub | 255 Nm | |
| Rear hub - wheel bearing housing bolts | Use new bolts. 65 Nm → Slacken off 90° → 65 Nm | |
| Steering wheel | 48 Nm | |
| Steering rack/box mounting | 90 Nm | |
| Steering track rod end | 55 Nm | |
| Brake caliper to carrier | 28 Nm | Front |
| Brake caliper/carrier to hub | 75 Nm | Front |
| ABS sensor | 9 Nm | Front |
| ABS sensor | 9 Nm | Rear |
| Road wheels | 110 Nm |