Ford Mondeo 1.0 EcoBoost (M1CA)
92 kW (125hp) 6000 rpm, R-Cat (2015-2015)
| Cylinder head | Renew bolts: Yes1. 10 Nm2. 40 Nm3. Slacken off 45°4. 30 Nm5. 90°6. 90° |
| Main bearings | |
| Big end bearings | |
| Oil pump to cylinder block | 25 Nm |
| Sump bolts | 10 Nm M10=48 Nm |
| Sump drain bolt | 25 Nm |
| Flywheel/driveplate | Use new bolts.Tighten bolts in the following stages:1. 10 Nm2. 25 Nm3. 50 Nm4. 90° |
| Clutch pressure plate | 29 Nm |
| Crankshaft pulley/damper centre bolt | Ensure crankshaft and camshaft are locked in the TDC position with special tools before disassembly. Otherwise engine damage may occur.Use new friction washer (B) Friction washer is NOT fitted at the factory.Use new bolt and washer (A)Fit special tool 303-732.Tighten bolt in the following stages:1. 25 Nm2. 70 NmRemove special tool 303-732.Connect special tool 303-1611-01 (torque multiplier, ratio 5:1):60 Nm90°90°90°90°90° |
| Camshaft sprocket/gear | Tighten bolts in the following stages:1. Finger tighten2. 30 Nm3. 50 Nm4. 95 Nm5. 45° |
| Camshaft carrier/cap | 10 Nm |
| Camshaft/rocker cover | 10 Nm |
| Inlet manifold to cylinder head | 10 Nm |
| Water pump | Tighten bolts in the following sequence1-5 = 10 Nm6-7 (use new bolts) = 15 Nm + 90° |
| Spark plugs | 13 Nm |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 10 Nm |
| Camshaft position (CMP) sensor | 10 Nm |
| Lambda sensor (Oxygen) | 48 Nm |
| Knock sensor (KS) | 20 Nm |
| Engine oil pressure switch | 20 Nm |
| Oil filter | 15 Nm |
| Front hub | 200 Nm |
| Front hub - wheel bearing housing bolts | 133 Nm |
| Rear hub - wheel bearing housing bolts | 133 Nm |
| Steering wheel | 48 Nm |
| Steering rack/box mounting | 200 Nm |
| Steering track rod end | 150 Nm |
| Brake caliper to carrier | Front: 30 Nm |
| Brake caliper/carrier to hub | Front: 150 Nm |
| Brake caliper to carrier | Rear: 28 Nm |
| Brake caliper/carrier to hub | Rear: 90 Nm |
| Back plate to hub | Rear: 12 Nm |
| ABS sensor | Front: 9 NmRear: Hub mounted sensor = 9 NmBearing mounted sensor = 5 NmWiring harness bracket bolt = 9 Nm |
| Road wheels | 135 Nm |
Disclaimer
The information provided on this website is for general informational purposes only. While we strive to ensure the accuracy and currency of the data, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website. Always consult your vehicle's service manual or a qualified professional for critical applications.