Porsche 911 3.4 Carrera (996)
Engine code: M96/01S (1999-2000)
235 kW (320hp) 6600 rpm
R-Cat
| Main bearings | Renew bolts/nuts: Yes |
| Main bearings | Stage 1: 25 Nm |
| Main bearings | Stage 2: 90° |
| Big end bearings | Renew bolts/nuts: Yes |
| Big end bearings | Stage 1: 20 Nm |
| Big end bearings | Stage 2: 90° |
| Sump drain bolt | 50 Nm |
| Flywheel/driveplate | 25 Nm + 90° |
| Clutch pressure plate | 23 Nm |
| Crankshaft pulley/damper centre bolt | 50 Nm + 90° |
| Water pump | 10 Nm |
| Spark plugs | 30±3 Nm |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 10 Nm |
| Camshaft position (CMP) sensor | 10 Nm |
| Engine coolant temperature (ECT) sensor | 25±5 Nm |
| Lambda sensor (Oxygen) | 55±5 Nm |
| Knock sensor (KS) | 20±2 Nm |
| Engine oil pressure switch | 25±5 Nm |
| Oil filter | 25 Nm |
| Front hub | 460 Nm. Use new nuts/bolts. |
| Rear hub | 460 Nm. Use new nuts/bolts. |
| Steering wheel | 45 Nm |
| Brake disc to hub | Front: 10 Nm |
| Brake caliper/carrier to hub | Front: 85 Nm. Use new nuts/bolts. |
| Brake disc to hub | Rear: 10 Nm |
| Brake caliper/carrier to hub | Rear: 85 Nm. Use new nuts/bolts. |
| ABS sensor | Front: 10 Nm |
| ABS sensor | Rear: 10 Nm |
| Road wheels |
130 Nm Lightly coat mating surfaces between wheel centre hole and hub. Use Optimoly TA (aluminium paste). Lightly coat thread and mating surfaces between bolt head and washer. Use Optimoly TA (aluminium paste). DO NOT grease conical seat. To remove or install wheels for models with ceramic discs use assembly pins (Porsche part No. 999 571 074 30). |